Delta Enterprises - Importers of specialized SILICONE based electrical varnishes, electrical resins, silanes, silane coupling agents, junction coating resins etc. from M/s. SHIN ETSU CHEMICAL CO. LTD., JAPAN
two component rtv silicone rubbers, thermal conductive rubber sheet, rubber sheet, thermal conductive rubber sheet importer, rubber sheets & electrical conductive processing goods, silicon defusing pump fluid, silicone diffusion pump fluid, dow corning, mould making silicone rtv, pad printing silicone rtv, hin etsu, silane coupling agnets, importer, delta enterprises, easy2source    
»
Contact Us
»
Feedback
»
Site Map
Products

Two Component Rtv Silicone Rubbers


Uses
Products
Appearance of main ingredient
Viscosity
23°C (73°F)
Pa·s{P}
Hardness* Durometer Type A
Elongation* (%)
Typical hardener& quantity (%)
Hardening type
Features and Benefits
Potting, coating and molding of electric, electronic and communication devices
KE119
Reddish brown
17 {170}
68
100
CAT-RP(10)
Cond.
Low viscosity.
KE1091
White
17 {170}
58
150
CAT-RP(10)
Low viscosity.
KE1092
White
80 {800}
58
180
CAT-RP(10)
Medium viscosity.
KE1204 (A-B)
Reddish brown
A 6 {60}
B 4 {40}
75
70
A solution,
B solution
1:1
Add.
Blending of the same quantity. UL 94V listed. Good thermal conductivity.
KE1205
Reddish brown
Patti
37
350
CAT-1205 (10)
Patti-like. Flame resistance.
KE1206
Reddish brown
17 {170}
36
200
CAT-RQ (4)
Low viscosity, low hardener and low modulus.
KE1223
White
9 {90}
76
60
CLA-3 (2)
Excellent in thermal conductivity. (3.5 * 10-3 cal/cm•sec•°C)
Potting of electric and electronic devices
KE108
Transparent
0.7 {7}
31
CAT-108(5)
Cond.
Good transparency.
KE103
Transparent
1.0 {10.0}
24
CAT-103(5)
Add.
Good transparency.
KE106
Transparent
3.5 {35}
56
100
CAT-RG(10)
High strength type.
KE109 (A-B)
Transparent
1.1 {10.10}
25
150
A solution,
B solution
1:1
Blending of the same quantity self adhesion type (Al, glass, PE)
KE104Gel
Transparent
0.7 {7}
Needle 65
CAT-108(5)
Gel-like, self-closing property.
KE1052 (A-B)
Transparent
1.1 {10.10}
Needle 65
A solution,
B solution
1:1
Gel-like, self-closing property. Blending of the same quantity. Room Temperature hardening.
KE110Gel
Transparent
0.7 {7}
Needle 65
CAT-110 (10)
Gel-like, self-closing property. High purity. Good low temperature properties.
Self adhesive use
KE66
Grayish white
5 {50}
40
120
CAT-RC(2)
Cond.
Low viscosity, room temp. hardening.
KE67
Grayish white
30 {300}
36
200
CAT-RC(2)
Medium viscosity, room temp. hardening.
KE68
Grayish white
Paste
40
200
CAT-RC(2)
High viscosity, room temp. hardening.
KE1212 (A•B•C)
Redish brown
6.4 {60.40}
74
70
A solution 100 ,
B solution 100, C solution 4
Add.
Low viscosity,
UL 94V Listed.
KE1800 (A•B•C)
White
350.14 {3500.140}
28
600
A solution 100 ,
B solution 10, C solution 2
High viscosity,
UL 94V Listed. High Strength.
Filling and sealing of tubing and duct penetrating parts
KE521 (A•B)
A: Black B: White
5.5 {50.50}
14
120
A solution,
B solution
1:1
Blending of the same quantity. Flame resistance foam.
Molding use
KE10
Greyish white
30 {300}
56
150
CAT-RA(2.5)
Cond.
Medium viscosity, high tensile strength.
KE12
White
10 {100}
41
180
CAT-RM(0.5)
Low viscosity, good durability for polyster.
KE17
Grayish white
13 {130}
50
150
CAT-RT(0.5) or
CAT-RM(0.5)
Low viscosity, good durability for polyster and polyurethane.
KE20
Greyish white
80 {800}
57
160
CAT-RA(2.5)
High viscosity type of KE10
KE30
White
Patti
63
100
CAT-RF(1.5)
Patti-like, making a model in 5~10 min.
KE112
Gray
8 {80}
65
100
CAT-RM(0.5) and CAT-112(3.5)
Epoxy resin molding use. Hardness.
KE24
Grayish white
80 {800}
83
70
CAT-RM(0.5) and CAT-RB-2(4.5)
Suitable for welder molding
of PVC. Hardness and good heat resistance.
KE113
Redish brown
7 {70}
70
120
CAT-RM(0.5)
KE1400
White
70 {700}
42
250
CAT-1400(10)
Suitable for molding of complicated and reversely tapered form. Good Durability for low foam urethane and polyster.
KE1402
White
70 {700}
33
300
CAT-1402 (10) or
CLC-224 (10)
KE1300
White
90 {900}
40
400
CAT-1300 (10) or
CLA-4(10)
Add.
Suitable for molding of complicated products with precise dimension. Esp. for prototype of vacuum molding process. High strength, less shrinkage.
KE1600
Grayish white
170{1700}
45
200
CAT-1600 (10)
Printing of curved surface
KE116
Grayish white
13{130}
28
260
CAT-RP(10)
Cond.
Possible to control hardness by adding RTV thinner.
KE1225
Light green
6{60}
25*
250
CLA-5 (5)
Add.
Less repellency of ink. Possible to control hardness by adding quantity f catalyst.